Ficoll™ PM400은 Sucrose로 만든 side chain-rich 중성 친수성 고분자로 수용액에 쉽게 녹일 수 있습니다. 정상적인 삼투압을 초과하지 않고 최대 50%(w/v)의 농도(최대 밀도 1.2 g/mL)로 조제 가능합니다.
Ficoll™ PM400은 원심분리 또는 침강 분리용으로 밀도구배 분리가 가능합니다. 침강 분리 방법은 원심분리에 민감한 세포 분리에 적용 가능하며, 밀도가 같고 크기가 다른 세포를 분리하는 경우에도 사용 가능합니다. 그 외에도 전기 영동(Electrophoresis), Hybridization, 그리고 동결 보존의 보호제로도 사용 가능합니다. Ficoll™ PM400은 Ficoll-Paque™의 원료로도 사용됩니다.
- 최대 1.2 g/mL 까지의 밀도 구현 가능
- Sucrose 보다 우수한 삼투압
- 세포의 기능 및 형태 유지가능
- 세포막 내에 침투 불가
Parameter | Ficoll™ PM400 |
---|---|
Application | Cell isolation |
Storage conditions | 4–30°C |
Certificate of Analysis | Only available for 17030005, 17030008 |
Endotoxin Activity Max. | 0.12 EU/mg |
Physical Form | Spray-dried powder |
Color | White |
Density Max. | 1.2 g/ml |
Estimated shelf life from manufacture date | 5 years |
Intrinsic Viscosity | ~ 17 ml/g |
Molecular Weight (Mr) Max. | ~ 5 × 10~⁵ |
Molecular Weight (Mr) Min. | ~ 3 × 10⁵ |
Physical State | Solid |
Reactivity and Stability | The reactivity and stability of Ficoll™ PM400 are determined by its hydroxyl groups and the glycosidic bonds in the sucrose residues. It is stable in alkaline and neutral solutions. At pH values lower than 3, it is rapidly hydrolyzed, especially at elevated temperatures. In neutral solutions, however, Ficoll™ PM 400 can be sterilized by autoclaving at 110°C for 30 min without degradation. Strong oxidizing and reducing agents should be avoided |
Relative Viscosity | 5 ηr at 20°C: 10% (w/v) |
Solubility | It is delivered as a spray-dried powder and is therefore readily soluble in aqueous media when it is added slowly with concomitant stirring. Any lumps formed during this procedure will dissolve fairly quickly. Concentrations up to 50% (w/v) can easily be attained |
Specific Rotation (alpha)20 | 50°-65° |
Stability | Stable in alkaline and neutral solutions, but are rapidly hydrolyzed in solution at pH 3, especially at elevated temperature |
Stokes Radius | ~ 10 nm |